Sunday, October 19, 2008

Forex Trading Indicator - MACD Dots - Forex Signals




Hello dear Forex trader. I want to take a few minutes of your time to explain a few things about the dots that may or may not be intuitive.


They are:

• What is MACD and how is it developed?

• Why I think forex MACD is the best forex indicator around

• How the MACD dots were developed

• What other indictors should be considered

• How to trade the MACD dots as a forex system I think very few of us can actually explain how MACD is developed. It is of utmost importance to understand your forex indicator. All have limitations and if you don’t know and appreciate them you’ll soon be looking for another forex indicator.




In figure 1 we begin to develop the MACD. It consists of a 12 period EMA (olive line) and a 26 EMA (purple line). The difference between those 2 lines is the “Fast Line” (yellow line). Now we have an oscillator. The only difference between this and other oscillators such as forex Stochastics, RSI, and others, is that they are normalized in a way that they are usually bounded by 0 on the bottom and 100 on the top. They “oscillate” between those two extremes. There are limitations to that type of oscillator which we will later. But, MACD isn’t done yet.




The “Fast Line” (yellow line) is smoothed again by a 9 period EMA to create a “Slow Line” (blue EMA). The difference between the Fast Line and the Slow Line is often plotted as a histogram (Green Plot). Smoothing the Fast Line and creating an additional moving average is why MACD is often referred to as an “oscillator of an oscillator”. Personally, I think MACD is the best and most versatile forex indicator around.


By observing MACD you can tell 4 things about price action:

• The forex trend of price action. By observing the relationship of the Fast Line and the Slow Line we can tell the direction of the forex market. If the Fast Line crosses above the Slow Line the trend is up. This is the premise of a moving average crossover forex system.

• Divergent situations. By comparing neighboring peaks and valleys of the histogram we can identify areas of regular and hidden divergence. If you do not understand divergence read this.

• Momentum. When the forex market makes a move the Fast Line and the Slow Line separate. The difference can be seen on the histogram. When this movement subsides the lines come back together and the histogram approaches zero. We can observe the histogram rolling over, or rolling up, towards zero. This is an indication that momentum is drying up.

• forex Market noise. If the market is going sideways there will be no separation between the Fast Line and the Slow Line. The forex histogram will necessarily be very close to 0. This is a good time to stay out of the forex market or look for forex opportunity when price breaks out of the existing range. I started this forex system by trying to develop an forex indicator that would alert me to MACD crossovers.


This is the Fast Line crossing the Slow Line or vice versa. I found that, in many cases, the move was over or well under way when the crossover occurred. I wanted a way to anticipate the crossover. When momentum stalls, the histogram ceases to continue in a given direction. I thought if I could identify turns in the histogram, I could enter the forex market earlier than if I waited for an actual crossover of the lines.




In figure 3 I colored the histogram green when rising and red when falling. For me, this makes it more visually apparent which way momentum might be heading. I included red arrows to show where momentum has peaked. The blue arrows show that downward pressure is slowing and that a reversal is possible. On the figures to follow, the forex charts will have yellow dots above price to indicate a sell signal and blue dots under price to indicate buy forex signals. They will approximately agree with the red and blue arrows I used in Figure 3.

There are only two problems left to solve:

• What if the forex market isn’t moving?

• How do I reduce false forex signals?



Figure 4


Figure 4 shows how both of these problems are addressed in the code. In the first third of the forex chart and the last third of the chart no forex signals are given (no yellow or blue dots). Sideways forex market movement is filtered out by requiring that the forex MACD histogram be above or below a certain height before any further calculations are permitted. The horizontal lines show the value above or below that is necessary to register a forex signal. The lower vertical line shows the first occurrence of the histogram beginning to fall. The upper vertical line shows the price at which the actual sell forex signal was generated. The code records the height of the histogram.


When the value of the histogram begins to fall it must exceed a preset differential before a signal is given. This prevents a forex signal from occurring too early or a spurious bar from generating a forex signal. Figure 5 represents a typical chart setup for me.



Figure 5


The yellow dots are forex sell signals, the blue ones are forex buy signals. The blue moving average is the 15 min 62 period EMA (this is a 15 min forex chart) and the white dashed line is the 62 period EMA from a 1 hour forex chart. I use a time of 4 times higher than the chart I am looking at to get a sense of the overall forex trend. It is very important to know if you are forex trading with or against the trend. Money can be made in either direction, but when going with the trend the probability of success is greatly improved. The bottom forex indicator is an oscillator. I use one called RSX but any oscillator that is capable of giving overbought or oversold indications will work well.


If a buy forex signal is generated concurrent with an oversold condition, or a sell forex signal is concurrent with an overbought condition, the odds are again improved. One last discretionary pattern that I suggest using are candle patterns. As price nears an extreme, the candles should become smaller and reversal candles should begin to show up. These are doji, hanging men, hammers, inverted hammers, shooting stars, and spinning tops. At this point it’s not much of a mystery how these dots can be traded as a forex system. There are additional indications that can be used to increase the odds of success.

These are:

• forex Trading concurrently with an overbought or oversold condition

• forex Trading with the prevailing trend

• Looking for reversal type candle forex patterns

• Looking for obvious levels of support and resistance where a reversal is likely to occur

• Looking for divergence and hidden divergence. There is an example of this directly in the middle of figure 5.

• Waiting for the forex signal candle (the one with the dot) to be exceeded prior to taking a forex trade. Sometimes this can keep you out of a lousy trade. If you are only looking for a quick forex profit, waiting may not be prudent since several points could be a large percentage of the gain you are looking for. But, if you are looking for larger gains waiting to see that the forex trend has indeed reversed can often be helpful.




Forex Signals - Pac_Man - Forex Trading System EA

Test Report


Update: added volumeMA in place of JMA option due to zero divide error. And blocked RSX random entry forex signal.

Here's a new martingale hybrid spun off of goblin bipolar.
The bulk of the bipolar program is here and untouched.


I changed the entry signal to CCI and Custom jma Volume forex indicator, to filter false forex signals.


Added SuperPacMan lot size progression
The trick to this version is in the equity target, lot sizing, JMA volume, CCI, and Turbo_JVEL
Equity target along with risk% setting will be the main exit forex strategy. When using money management=true Using risk setting and equity setting you can make it exit before the target.
When you increase the risk, the equity target will be hit sooner. Smaller targets are more easily hit. I go for 6-10 pips with the equity target.


If you set the regular target that low you also have to set forex pips low too. Then you get max forex trades opened when ever the forex market sneezes.
The regular targets are there to get hit when there are forex trades in both directions offsetting positive equity.


This alone only works for the first 2 trades. The more forex trades open the closer to the hard target it has to get to reach the equity target


Making the 4th and 5th trade reach all the way to the hard target to close all the forex trades.


Adding the SuperPacMan lot sizing handles this problem in a couple different ways. Play with it to see witch one you like.


The supercell can be used to increase the last trade 250%. This way the equity target can be reached and exit the potential disaster sooner rather than later (or not at all)
Turns out JVEL is a great filter. I increased its settings for better filtration.


CCI is a great trigger as well as a filter for keeping it in the direction of forex market momentom.
JMA Volume filter will make sure it forex trades only when there is sufficient forex market volume.


RSX is set high because when UseconsertiveRSX_Signal=false, the forex signal is simply based on RSX turning up or down, using slope for filter rather than trigger.
Set RSX to 12-17 if using UseconsertiveRSX_Signal=true, using conventional RSI 30/70 rules.


Default settings are good settings. But not the only ones that will work.


Enhanced BASIC Synergy FOREX EXPERT ADVISOR

** DOWNLOAD EA



Introduction

The Synergy forex Trading Method was developed by Dean Malone and is an effective Forex trading method developed to simplify trading decisions with high probability forex precision. It combines the forex market forces of Price Action, forex Trend, Momentum and Market Strength to produce higher probability trades. The Synergy forex trading method depicts...in real-time...the interaction of these forex market forces providing traders the means to make forex trading decisions with greater confidence and less emotional hassle

With Synergy, traders identify and use two important forex trading components in real-time: Price Action and Sentiment.Price Action is forex market movement, such as the oscillation of Open, High, Low and Close prices. Too often, forex traders are mesmerized by trivial price fluctuations and lose sight of the underlying trend of the market. Many traders tend to jump in and out of the forex market instead of staying with the trade as a forex trend develops. Synergy is designed to eliminate price distortions. It reveals periods of forex market strength and trend and periods of consolidation. Sentiment is the intuitive feeling or attitude of traders and forex investors in the forex market. For example, if the sentiment of the market is bullish, then forex traders and investors expect an upward move in the market. Often, sentiment is an indication of optimism or pessimism in the forex market based on recent news announcements or political events. The Synergy forex method uses a hybrid custom forex indicator developed to show positive (buyers) sentiment or negative (sellers) sentiment. Working in unison, Price Action and Sentiment give forex traders a distinct trading advantage. When both are in agreement, a favorable forex trading condition exists. For instance, when price action is showing upward movement with buyers’ sentiment, there is higher probability of a Long position having a favorable outcome. Similarly, when price action has a downward forex movement in conjunction with sellers’ sentiment, a short position has a favorable outcome.

The forex EA was developed by Derk Wehler in Forex-tsd forum to eliminate the stress of gluing to the PC for 24hours looking for trading forex opportunities.

INSTALLATION INSTRUCTIONS: Unzip the file into some temporary folder.Best to shut down your trading forex platform, and then... From there, put the files in these locations: SynergyEA.mq4
> ...\expertsLibDerksUtils.mq4 -> ...\experts\librariesLibOrderReliable.mq4 -> ...\experts\librariesLibDerksUtils.mqh -> ...\experts\includeLibOrderReliable.mqh -> ...\experts\includeSynergyInd.mq4 -> ...\experts\indicatorsHeikenAshi_DM.mq4 -> ...\experts\indicatorsTraders_Dynamic_Index.mq4
> ...\experts\indicatorsChaikin's Volatility_Kalenzo.mq4
> ...\experts\indicators

When you start back up your platform, everything should compile.If you have troubles, you can try compiling manually, by opening your meta4 editor (from your forex platform), and loading and of the .mq4 files listed above and hitting the "Compile" button. You should have no errors or warnings.


EXPLANATION OF SETTINGS FOR FOREX EA

The SynergyInd uses mostly the same settings; the ones that differ are self-explanatory, so although this document only covers settings for the forex EA, it should help you set up the SynergyInd as well.


FOREX MONEY MANAGEMENT SETTINGS

TYPE NAME DEFAULT SETTING
Bool UseMoneyManagement false
Bool UseDualWinMM false
Double TradeSizePercent 3.0
Double ScaleInPercent 25.0
Int MaxScaleIns 0
Bool SplitOrder true
Double Lots 0.2
Double MinLots 0.01
Double MaxLots 100.0

UseMoneyManagement: If enabled, it will calculate how many lots to trade based on TradeSizePercent, but will never trade less than MinLots or more than MaxLots.

The way it calculates how much to trade depends on how much information the EA has about those trades. If you have entered a StopLoss value greater than zero, or if you have enabled UseOppPAC_Trail and OppPACforInitSL, then the forex EA will use an initial stop loss when it places the trade. Given that info, it can calculate worst-case scenario (trade goes against you and hits stop loss) and uses a lot quantity such that, if you lose, your forex account will end up losing TradeSizePercent.

If it has no StopLoss set (zero), then it has to use a different form of calculation (the one many forex EAs use as a standard), but using your margin requirements and your forex account leverage.

In general you will find that if you have a zero StopLoss, you will probably want to use a higher TradeSizePercent, and if you are using a StopLoss (or UseOppPAC_Trail with OppPACforInitSL), then you want a much lower TradeSizePercent; probably 3 or 4 times lower. Ex: No SL, try 5 - 15%, is using SL, try 1 - 5%.
UseDualWinMM: This enables a type of forex money management also known as the binary money management forex system, as pioneered by a 17th century mathematician named d'Alembert. Its full explanation is beyond the scope of this forex manual, but basically this is a system by which the user will always end up “one unit” ahead once the forex EA wins two trades in a row.

This forex system is meant for forex EAs that only enter one trade at a time, so if you set MaxScaleIns to anything but zero, you will get unexpected results, as you likely also shall if you enable UseSplitLots. In addition, the TakeProfit value must be known at the time the trade is placed, so the author does not recommend it’s use in this forex EA, as he feels the forex system works much better utilizing settings incompatible with this option.

TradeSizePercent: Explained above.

ScaleInPercent is the percentage it will use to calculate how many lots to forex trade on any scale-in trade, and is based off the original trade. So if ScaleInPercent is 25.0 and you have an initial trade with a size of 0.8 lots, then each additional trade in the same direction will be placed with 0.2 lots.

MaxScaleIns is the number of additional trades in the same direction that you want the forex EA to take, should it get a continuation forex signal. A continuation signal occurs, for long forex trade, when the TDI green line moves above the top blue Volume line, and is between the values of 50 and 68. For short trades, when the green line is below the lower blue Volume line and the green line’s value falls from 32 to 50.

SplitOrder: When the forex EA gets an entry forex signal and this is set true, it will split the trade into two forex trades for half the lots each. One of them will have no take profit value, and the other will have a take profit depending on the TakeProfit setting. Therefore, one half your trade will exit when it hits take forex profit, and the other half will go until closed by either the PAC trail (assuming you set “UseOppPAC_Trail” to true), or the stop loss / trailing stop function, or the forex ATR exit is enabled, or due to the entry of a trade in the opposite direction.


Lots: The number of lots to use per trade. If SplitOrder is true, then it will open two orders, each at Lots/2. If you are using MoneyManagement, this setting is ignored.

MinLots, MaxLots: These are used with MoneyManagement, and explained in that section.



FOREX INDICATOR SETTINGS

TYPE NAME DEFAULT SETTING
int UseEntry68_32 0
int ReqRedYellowCombo 0
int UseVolExpanding 0
double UnlessVolWidthGT 0.0
int ReqEntryNearPAC 1
int UseHTF_Trend 0
int UseSmallerOrOpp 0
int UseSmallerExit 0
double DefineSmaller 0.08
int UseClosedInside 0
int UseTDI_ExitDir 0
int UseOppPAC_Trail 1
int OppPACforInitSL 0

UseEntry68_32: For a forex signal to occur, one of the requirements is for the green line to be above 50 for long, or below 50 for short. If this is enabled, the green line is also required to be below 68 to forex signal a long trade, and above 32 to signal a short forex trade.

ReqRedYellowCombo: If enabled, this setting requires the red TDI line to be above the yellow line to forex signal a long trade, or below it to signal a short.

UseVolExpanding: Enabling this setting will require that the blue TDI volume lines be diverging in order to forex signal a trade (with exception of “UnlessVolWidthGT” below).

UnlessVolWidthGT: If UseVolExpanding is enabled, and this value is non-zero, then the “expanding volume” rule will be ignored so long as the width of the blue volume bands is greater than this number. The intention here is that sometimes the volume bands are parallel, or converging just slightly, but still far apart, indicating enough sustained volume for a good forex trade.

ReqEntryNearPAC: If this setting is enabled, an otherwise valid forex trade will not be entered if the entry point is farther from the closest PAC line than the width of the PAC itself. The reasoning is that sometimes there is a large forex breakout (e.g. news announcement) where the candle is very large, but the forex strategy, which always lags somewhat, does not forex signal a trade until after that candle has already moved most of it’s distance, or even until a following candle. Often after this occurrence, the price loses momentum or retraces and then stops out at a loss. So this forex setting as to attempt to stay out of such trades, which are triggered by drastic movement.


UseHTF_Trend: This setting, “Use Higher Time Frame Trend”, if enabled, will only allow a trade to be entered if it is in the same direction as the “trend” of an upper timeframe. If set to zero, it is disabled, otherwise it should be set to the higher timeframe (in minutes); e.g.:

60 Hourly
240 Four Hour
1440 Daily
10080 Weekly
43200 Monthly



UseSmallerOrOpp: If this is enabled, the forex EA will check at the open of each candle, and will exit a trade if the previous Heiken Ashi candle is the opposite color from the one preceding it.

UseSmallerExit: If this is enabled, and UseSmallerOrOpp is enabled, then the forex EA will also close the trade if the previous candle is the same color as the one preceding it, but is much smaller than the previous one. How much smaller? See DefineSmaller.

DefineSmaller : This is the multiplier used to determine what “smaller” is, for use with UseSmallerExit, above.

UseClosedInside: If this is enabled, the forex EA will check at the open of each candle, and will exit a trade if the previous forex Heiken Ashi candle closed within the PAC.

UseTDI_ExitDir: If this is enabled, the EA will check at the open of each candle, and will exit a forex trade based on the previous candle’s TDI values as follows:

For longs, it will exit if the green line is greater than 68, but below the red line and the upper blue line.

For shorts, it will exit if the green line is less than 32, but above the red line and the lower blue line.

UseOppPAC_Trail: When this is enabled, the EA will check at the open of each candle, and will exit a trade if the closing price of the previous (just-closed) candle is outside the opposite side of the PAC. This serves to act as a sort of trailing stop, with the unique feature that it will only act on the closing price of the candle. Therefore the price can spike, beyond the opposite PAC, but if it returns before it closes, the order will not exit.

OppPACforInitSL: If this option is enabled, rather than use the StopLoss setting as the initial stop loss for the trade, the forex EA will use the opposite side of the PAC (plus the spread) as the initial stop loss point.


FOREX ATR EXIT SETTINGS

TYPE NAME DEFAULT SETTING
bool UseATR_Exit false
int ATR_Period 5
double ATR_PipMult 4
int ATR_MinPips 50
int ATR_MaxPips 500

The ATR Exit is a simple forex method of trying to let the forex market’s movement tell the forex EA where to set take profit. It works by setting the take profit value to be a certain multiple of the current ATR value. The ATR is Average True Range, and it is basically just a moving average of the range (high – low) of the last “X” candles. Here, by default, I use an forex ATR period of 5, so “X” is 5 candles. So, to give a simple example, if the average range of the last 5 candles is 12 pips, and your ATR_PipMult is set to 4, it sets the take profit at 48 forex pips.

However, the ATR values is always changing, so if the forex market is moving rapidly in one direction, the current candle is probably larger than the previous one; the ATR value is increasing and so is the number of forex pips required for exit. But then as the candles get smaller again (forex market slows), the required take profit value starts to decrease… but meanwhile, the actual forex trade profit has increased, and when the two meet, it exits the trade.

The ATR rarely (essentially never) captures the maximum amount of forex pips that were available on the move, but it does tend to capture most (perhaps 70-80%) of it, and it keeps you from having to use a set take forex profit value, when you don’t know how much the forex market may move.

The optimal situation for the ATR stop is where the market goes in a positive direction for a while, making some larger candles, but then trails off near the top of the move, flattening out and making smaller candles. The worst situation is there the candles move in a positive direction, making bigger candles, but then changes direction and makes equally large candles coming back down. In these cases, the ATR will not be able to secure those pips; it will stay in the forex trade and the profits will be lost as it retraces.

While you are certainly welcome to adjust the ATR_Period setting, the author has always just left it at 5; you wouldn’t want it much longer because it would not be responsive enough. The important variable to experiment with here is the ATR_PipMult. Depending on forex currency pair and timeframe, you may wish to adjust this anywhere from 2.0 to 40.0, but the author recommends you try a value of 4 to 7 to start with. Basically, the higher this value, the more pips the forex EA will demand from the trade. Please play with this first on a forex demo account, or better yet, run a visual backtest to get a feel for the ATR_PipMult setting.

SL, TP & TRAIL EXIT SETTINGS

TYPE NAME DEFAULT SETTING
int StopLoss 0
int TakeProfit 100
int TrailingType 3
int TrailingValue 0
int FirstMove 100
int FirstSL 100
int SecondMove 0
int SecondSL 0
int ThirdMove 0

StopLoss is the initial stop loss assigned to each trade. If zero, no stop loss is used. Please see various other related settings above, especially UseOppPAC_Trail, which will override this forex setting.

TakeProfit is the set amount profit to use for each trade. If zero, no set take profit is used, and exit will instead occur based on one of the following:

The Price Action Channel, if UseOppPAC_Trail enabled

The trailing stop, if TrailingStopType and supporting settings are enabled

The ATR stop, if UseATR_Exit is enabled

The Heiken Ashi candle color, size or closing value, depending on the settings of UseSmallerOrOpp, UseSmallerExit, DefineSmaller and UseClosedInside.

The position of the TDI forex indicator lines, depending on the settings of UseTDI_ExitDir,

Entry forex signal in the opposite direction of the current trade

Please read this entire manual for information on these settings.


TrailingType: This is for use with any of the various kinds of trailing stops available to you. At the time of this writing, there are 6 different types of trailing stop available.

They are explained here:

Type 1:
Moves the stop loss without delay (pip for pip).


Type 2:
Waits for price to move the amount of the trailing stop (TrailingValue) before moving stop loss then moves like type 1. The only difference between this and type 1 is that this one will not initially move the SL until the it would be set at breakeven.


Type 3:
Uses up to 3 levels for trailing stop, and utilizes these additional parameters:

FirstMove: When the forex trade is in profit this much...
FirstSL: Move SL this far from the current price

SecondMove: When the trade is in profit this much...
SecondSL: Move SL this far from the current price

ThirdMove: When the forex trade is in profit this much...
TrailingValue: Use this value & trail like Type 1

One of the unique qualities of a type 3 (or type 5) is that you do not have to use it all. For example, if you just want it to start trailing by 15 pips once it gets to 90 in profit, just set:

TrailingType = 3
TrailingValue = 15
FirstMove = 0
FirstSL = 0
SecondMove = 0
SecondSL = 0
ThirdMove = 90

Or, if say you do not want it to trail at all, but you want to lock in 50 forex pips when the profit reaches 80, and want to lock in 130 pips if the profit reaches 180, then you would set:

TrailingType = 3
TrailingValue = 0
FirstMove = 80
FirstSL = 30
SecondMove = 180
SecondSL = 50
ThirdMove = 0


Type 4:
Ratchets the SL up:
e.g. if SL = 20, and open price is 1.2400, then
when price reaches 1.2420, SL is set to 1.2400; when
it gets to 1.2440, SL is moved to 1.2420, etc.


Type 5:
Same as Type 3, except after 3rd move, it ratchets like type 4


Type 6:
Keltner Channel Trail
Uses various Keltner Channels as check points;
When it hits the next higher (for buy) channel
point, sets the stoploss to the previous
channel point. Default "K" values for Keltner
indicators are: 4,5,6,8,10,12,15,18,20

AUTHORS NOTE: If you are confused by all these trailing options, forget about them. The forex EA uses a trailing function from my library; all my forex EAs have it. But that doesn’t mean it’s best to use all of it. For this EA so far, I have only tried a “standard” type 2 trail, TrailingType = 2, TrailingValue = 100 (or whatever you want to trail by).

TrailingValue is the number of pips to trail by; see explanation above regarding various types of trail.

FirstMove, FirstSL, SecondMove, SecondSL, ThirdMove: See trailing types 3 and 5, explanation above.


GENERAL SETTINGS:

TYPE NAME DEFAULT SETTING
bool UseAlert false
bool UseEmail false
int Slippage 1
int MagicSeed 28000
string ExpertName "SynergyEA"
int DebugLevel 5

UseAlert, if set to true, will pop up an alert window when the forex EA enters or exits a trade.

UseEmail will send an email when the forex EA enters or exits a trade. This will only function if you have correctly set up your email settings in your platform.

Slippage is the amount you will allow your broker to "slip" the price, on entry or exit. Common to most forex EAs.

MagicSeed is just any number you want to enter, or leave at default. The forex EA will use this as a base, then add a unique number to it based on the forex currency and timeframe, and will use this end number to "tag" trades, so it (and other EAs) know which forex trades were opened by it. Magic numbers are used with all forex EAs.

ExpertName is simply the text that will appear as the comment on each trade the forex EA makes.

DebugLevel sets a level, from zero to 5, which controls how much info gets printed to the experts tab. I have left it defaulted to 5, but after you are satisfied that the forex EA is working as it should, I recommend you change to zero so that it will print nothing extraneous to the experts tab.


SPOUTNIK system

DOWNLOAD

SIMPLE INDI




DOWNLOAD

Saturday, October 18, 2008

Profit Forex trading method #2

the reccomended forex currency

forex pairs are: GBP/USD
we work by 0.1 lot at every 400$

we put two forex orders at 10.30 in the morning (at winter time) according to Moscow (opening of Europe session+30 minutes Moscow time):
1) buy-stop on the maximum price (+1 point) of the current day
stoploss on the minimum price (-1 point) of the current day.
take forex profit is defined in such way: strain the lines of Fibonacci from price maximum of the current day to price

minimum of the current day at 10.30 in the morning and take price value of Fibonacci's line 161.8 in the capacity of take profit (visually)
2) sellstop on price minimum (-1point)of the current day
stoploss on the price maximum (+1poin) of the current day
takeprofot is defined in such way: strain Fibonacci's lines from price minimum of the current day to the price maximum of the current day at 10.30 in the morning and take price value of

Fibonacci's line 161.8 in the capacity of take profit (visually)

we close unclosed forex market positions at about 00.00 at Moscow time (or earlier at 22.00-23.00)
we delete not worked forex orders
that is all!
if at a point of installation of the order at 10.30 forex market (current) price is equal to maximum or minimum of price of the current day, we put order on minimal possible distance from current price (it is usually 10 points) or we wait for rollback or

just open position at the current price.

if at apoint of installation of the order at 10.30 the difference og prices from minimum to maximum more than 50-70 points (strong price movement), we do not sell at this day or sell by trend with takeprofit of 20-30 points

Forex Trader Info - Visit

Forex Trading Method Number ONE

recommended forex currency pairs are: GBP/USD , EUR/USD , USD/CAD
we work forex market by 0.1lot at every 650-1000%

at 9.30 by Metatrade (opening of Europe forex session in winter at 10.30 according to Moscow) we are doing forex buy or sell by 0.1lot in the direction of forex trend

forex trend is defined on the forex daily graphics: buy if the price of closing of the previous day is higher than sliding average with period 7 and shift 1

forex sell if the

price of closing of the previous day is lower than sliding average with peiod 7 and shift1.

we put 'trailing stop' 15 points. Forex stop-loss is 25-30 points. closing is by loss, trailing stop or at the end of the day

if you can not be constantly in internet, just put fixed stop-loss=30 points and take-profit-65 points. in this case the income is lower and equal 15-20% in month forex trading